Skip to main content

Prisma Cloud (formerly Twistlock) scanner reference

You can scan container images using Prisma Cloud.

Before you begin​

Docker-in-Docker requirements​

note

Docker-in-Docker is not required for ingestion workflows where the scan data has already been generated.

You need to include a Docker-in-Docker background service in your stage if either of these conditions apply:

  • You configured your scanner using a generic Security step rather than a scanner-specific template such as Aqua Trivy, Bandit, Mend, Snyk, etc.
  • You’re scanning a container image using an Orchestration or Extraction workflow.
Set up a Docker-in-Docker background step

  1. Go to the stage where you want to run the scan.

  2. In Overview, add the shared path /var/run.

  3. In Execution, do the following:

    1. Click Add Step and then choose Background.
    2. Configure the Background step as follows:
      1. Dependency Name = dind
      2. Container Registry = The Docker connector to download the DinD image. If you don't have one defined, go to Docker connector settings reference.
      3. Image = docker:dind
      4. Under Optional Configuration, select the Privileged checkbox.
Configure the background step

Root access requirements​

You need to run the scan step with root access if either of the following apply:

  • You need to run a Docker-in-Docker background service. This is required in the following scenarios only:

    • You're using a generic Security step to run an Orchestrated or Extraction scan, rather than a scanner-specific step such as Aqua Trivy, Bandit, etc. (not required for Ingestion scans).

    • You're scanning a container image using an Orchestrated or Extraction scan (not required for Ingestion scans).

  • You need to add trusted certificates to your scan images at runtime.

note

You can set up your STO scan images and pipelines to run scans as non-root and establish trust for your own proxies using self-signed certificates. For more information, go to Configure STO to Download Images from a Private Registry.

PrismaCloud step configuration​

The recommended workflow is add a PrismaCloud step to a Security Tests or CI Build stage and then configure it as described below. You can also configure Prisma Cloud scans programmatically by copying, pasting, and editing the YAML definition.

note
  • UI configuration support is currently limited to a subset of scanners. Extending UI support to additional scanners is on the Harness engineering roadmap.
  • Each scanner template shows only the options that apply to a specific scan. If you're setting up a repository scan, for example, the UI won't show Container Image settings.
  • Docker-in-Docker is not required for these steps unless you're scanning a container image. If you're scanning a repository using Bandit, for example, you don't need to set up a Background step running DinD.
  • Support is currently limited to Kubernetes and Harness Cloud AMD64 build infrastructures only.
Scanner Template

Scan​

Scan Mode​

The orchestration mode to use for the scan. The following list includes the UI and YAML values for the supported options.

  • Orchestrated A fully-orchestrated scan. A Security step in the Harness pipeline orchestrates a scan and then normalizes and compresses the results.
  • Extraction A partially-orchestrated scan. The Security step pulls scan results from an external SaaS service and then normalizes and compresses the data.
  • Ingestion Ingestion scans are not orchestrated. The Security step ingest results from a previous scan (for a scan run in an previous step) and then normallizes and compresses the results.

Scan Configuration​

The predefined configuration to use for the scan. All scan steps have at least one configuration.

Target​

Type​

The target type to scan for vulnerabilities.

  • Repository Scan a codebase repo.

    In most cases, you specify the codebase using a code repo connector that connects to the Git account or repository where your code is stored. For information, go to Create and configure a codebase.

  • Container Image Scan the layers, libraries, and packages in a container image.

Name​

The Identifier that you want to assign to the target you’re scanning in the pipeline. Use a unique, descriptive name such as codebaseAlpha or jsmith/myalphaservice. Using descriptive target names will make it much easier to navigate your scan data in the STO UI.

Variant​

An identifier for a specific variant to scan, such as the branch name or image tag. This identifier is used to differentiate or group results for a target. Harness maintains a historical trend for each variant.

You can see the target name, type, and variant in the Test Targets UI:

Target name, type, and branch

Ingestion File​

The results data file to use when running an Ingestion scan.

Generally an Ingestion scan consists of a scan step (to generate the data file) and an ingestion step (to ingest the data file).

In addition to ingesting scan data in the external scanner's native format, STO steps can also ingest data in SARIF and Harness Custom JSON format.

For more information, go to Ingest Scan Results into an STO Pipeline.

Container Image​

Type​

The registry type where the image is stored:

Domain​

The URL of the artifact repository that contains the image to scan. Examples:

  • docker.io
  • app.harness.io/registry
  • us-east1-docker.pkg.dev
  • us.gcr.io

Name​

The image name. For non-local images, you also need to specify the image repository. Example: jsmith/myalphaservice

Tag​

The image tag. Examples: latest, 1.2.3

Access Id​

Username to log in to the container registry.

Access Token​

The access token used to log in to the container registry. In most cases this is a password or an API key. You should create a Harness text secret with your encrypted token and reference the secret using the format <+secrets.getValue("project.container-access-id")>. For more information, go to Add and Reference Text Secrets.

Authentication​

Domain (extraction)​

The fully-qualified URL to the scanner.

Enforce SSL​

The step and the scanner communicate over SSL by default. Set this to false to disable SSL (not safe).

API Version​

The scanner API version. Some scanners require this.

Type​

The scanner API version. Specify one of the following:

  • Username & Password
  • API Key

Access ID​

Username to log in to the scanner.

Access Token​

The access token to log in to the scanner. In most cases this is a password or an API key.

You should create a Harness text secret with your encrypted token and reference the secret using the format <+secrets.getValue("project.container-access-id")>. For more information, go to Add and Reference Text Secrets.

Scan Tool​

Image Name​

For Extraction scans, the name of the image that you want to extract from Prisma Cloud.

Log Level, CLI flags, and Fail on Severity​

Log Level​

The minimum severity of the messages you want to include in your scan logs. You can specify one of the following:

  • DEBUG
  • INFO
  • WARNING
  • ERROR

Additional CLI flags​

You can use this field to customize the scan with specific command-line arguments supported by that scanner.

Fail on Severity​

Every Security step has a Fail on Severity setting. If the scan finds any vulnerability with the specified severity level or higher, the pipeline fails automatically. You can specify one of the following:

  • CRITICAL
  • HIGH
  • MEDIUM
  • LOW
  • INFO
  • NONE — Do not fail on severity

The YAML definition looks like this: fail_on_severity : critical # | high | medium | low | info | none

Settings​

You can add a tool_args setting to run the twistcli images scan binary with specific command-line arguments. For example, you can prevent the scan from publishing results to the Console like this: tool_args : --publish FALSE.

Additional Configuration​

In the Additional Configuration settings, you can use the following options:

Advanced settings​

In the Advanced settings, you can use the following options:

Security step configuration (legacy)​

You can set up Prisma Cloud scans using a Security step: create a CI Build or Security Tests stage, add a Security step, and then add the setting:value pairs as specified below.

Target and variant​

The following settings are required for every Security step:

  • target_name A user-defined label for the code repository, container, application, or configuration to scan.
  • variant A user-defined label for the branch, tag, or other target variant to scan.
note

Make sure that you give unique, descriptive names for the target and variant. This makes navigating your scan results in the STO UI much easier.

You can see the target name, type, and variant in the Test Targets UI:

Target name, type, and branch

For more information, go to Targets, baselines, and variants in STO.

Prisma Cloud scan settings​

  • product_name = twistlock
  • scan_type : containerImage
  • policy_type : orchestratedScan, dataLoad, or ingestionOnly
  • When policy_type is set to orchestratedScan or dataLoad:
    • product_image_name
    • product_domain
    • product_access_id
    • product_access_token
  • product_config_name
    • Accepted values(s):
      • default
  • fail_on_severity - See Fail on Severity.

Container image scan settings​

The following settings apply to all scanners where the scan_type is containerImage.

  • container_type
    • accepted value(s): local_image, docker_v2, jfrog_artifactory, aws_ecr
      • for container_type set to local
        • None
      • for container_type set to docker_v2
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to jfrog_artifactory
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to aws_ecr
        • container_access_id: Username
        • container_access_token: Password/Token
        • container_region: AWS default region
  • container_domain

Ingestion file​

The following setting is required for Security steps where the policy_type is ingestionOnly.

  • ingestion_file The results data file to use when running an Ingestion scan. You should specify the full path to the data file in your workspace, such as /shared/customer_artifacts/my_scan_results.json.

    In addition to ingesting scan data in the external scanner's native format, STO steps can also ingest data in SARIF and Harness Custom JSON format.

    The following steps outline the general workflow for ingesting scan data into your pipeline. For a complete workflow description and example, go to Ingest Scan Results into an STO Pipeline.

    1. Specify a shared folder for your scan results, such as /shared/customer_artifacts. You can do this in the Overview tab of the Security stage where you're ingesting your data.

    2. Create a Run step that copies your scan results to the shared folder. You can run your scan externally, before you run the build, or set up the Run step to run the scan and then copy the results.

    3. Add a Security step after the Run step and add the target name, variant, and ingestion_file settings as described above.